Overclockers Australia has just posted a review that cover a couple of cool case mods for you. Head on over and check out their take on Glowire and Lazer LEDKit. here's a snip:
"The installation of the glowire is very straight forward for the most part. Place the wire wherever you want, and use some form of adhesive to hold it there (i.e. Zip ties, super glue, or silicon for a less permanent bond). The wire will bend any direction, although they recommend not making full 90 degree bends too tight, as it can cause dim or dark spots at the corner over time. After you have the wire mounted, connecting the transformer that powers the wires is equally simple. For the base model transformer just mount it with the included double sided foam tape (servo tape if you will) to the back of your case, and turn it on.
Further Reading: Read and find more news at our news index page.