Fit and Finish

(Click the above image for the large version)

With everything installed and the door back in place, you get another look at the Zero 2 just before I add some juice to power it up. Notice the mesh grill does allow you to still see rather well into the case.

(Click the above image for the large version)

Spinning it fully to look directly inside at the hardware, you can see even with no interior lighting, the internals are clearly visible. Fans will block a bit of this, but during operation you will still have a view inside.

(Click the above image for the large version)

I opened the front door to show a bit of what the inside looks like all back together.

(Click the above image for the large version)

Testing out the optical drives functionality and also showing that the door gets way out of the way, this should cause no issues when the draw is functioning.

(Click the above image for the large version)

Here we have a completed look at the rear of the case with all the components in place. Nothing out of the ordinary to discuss here; everything fit and went easily into position.

(Click the above image for the large version)

Adding power shows off the NZXT Zero 2's flash. As I alluded to earlier, this is the molex powered LED that surrounds the front intake. To the top left is an LED that outlines the power switch, so it is easy to find in low lit rooms.

(Click the above image for the large version)

Here we are looking at the Zero 2 from the top down. You can see that the door is centered with a blue led line running down it. Just below that is the green HDD activity light.

(Click the above image for the large version)

One last look at the Zero 2 as we take a step back to absorb this case in action.